Sharp Aquos LC 37SH20U - Manual (Page 8)

7
QUICK REFERENCE
STOP! To safely remove the television from the box
It's best to use 2 people to remove the television for stability.
1. Use the cardboard holders on either side of the television to remove it from the box.
2. Remove the cardboard; however, keep the wrapping on the television to protect it while moving.
3. Lift onto installation location as the diagram illustrates.
Ventilation & Cleaning Tips
Keep your television in a well ventilated area and make sure not to place it by a heat source or
use near water. The television is designed for AC use only and should be used with supplied AC
cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and
avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use
liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
QUICK INSTALLATION TIPS
1. Attach your antenna to the back of the TV.
(See page 13.)
NOTE
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
3. Place the Ferrite core in the space indicated in the below
fi gure and bundle the cords properly with a cable clamp
and cable tie.
4. How to turn on the television for the fi rst time.
A) Press POWER on the television.
POWER
POWER indicator
2. Connect the AC plug for the television into the AC outlet.
B) POWER indicator on the front of the television lights
GREEN.
NOTE
• Speaker cannot be detached from the TV.
• TV angle cannot be adjusted.
AC outlet
• Place the TV close to the AC outlet, and keep the power
plug within reach.