Sanyo DS31520 - Manual (Page 12)

12
QuickTips
■ Make sure all cable
connectors are fully
seated on jacks.
■ Always match cables
according to the
colors;
RED for right
audio, WHITE for left
audio and YELLOW for
video.
■ A solid Blue screen
with the word Video
displayed means that
the Video mode is
selected, but no signal
is being detected at
the Video jack.
■ You may be able to
use the remote con-
trol to operate your
VCR, Cable Box,
Satellite Receiver, and
TV. (See pages 7~9.)
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
USING THE AUDIO/ VIDEO INPUT JACKS
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
1. Connect VCR, DVD, DSS, or other equipment’s Audio Out (R/L) to the TV Audio
Input (R/L)
❶
.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
2. Connect VCR, DVD, DSS, or other equipment’s Video Out to the TV Video Input
❷
.
Optional
Connect VCR, DVD, DSS, or other equipment’s S-Video Out to the TV S-Video In
Jacks
➁
.
Using the S-Video In jacks overrides the Video In jacks
❷
.
3. Press POWER
❸
to turn on the TV. Turn on external equipment also.
4. Press the INPUT key
❹
to select program source: TV signal or signal from the equipment
you have connected to the A/V jacks.
UHF/VHF/CATV
75 Ω
AUDIO VIDEO
INPUT
S-VIDEO
INPUT
R
L
VIDEO
AUDIO
(MONO)
R
L
AUDIO
OUTPUT
IN
OUT
A/V JACKS
L- -R AUDIO VIDEO
L- -R AUDIO VIDEO
S-VIDEO OUT
R L
OUTPUT
AUDIO OUT VIDEO OUT
❶
Back of VCR
❷
Back of DVD Player
Back of TV
➁
INPUT POWER RESET
DVD SAT AUX
VCR TV CABLE
❹
Remote Control
❸