Smart Technologies SMART Document Camera 280 - Manual (Page 30)

22 Using the Document Camera 99-00864-20 D0
3. Press the Menu button on the document camera control panel.
The on-screen display menu appears. For more information on using the on-screen
display menu, see page 9.
4. Select Format Media in the on-screen display menu, and then press the right arrow button
to display its submenu.
5. Select Format?, and then press the Menu button to confirm your selection.
1. After you finish using the SD memory card, press the Camera button on the document
camera control panel to display the camera image on the connected projector or display.
2. Push the SD memory card to remove it from the slot.
Transferring Image Data from the SD Memory Card to a Computer
If you connect a computer to the document camera using a USB cable, you can transfer image
data from an SD memory card (not provided) to a computer.
NOTE: You can transfer image data to your computer only if the computer is running the
Microsoft® Windows® 2000 (SP4 or later), Windows XP (SP2 or later), or Windows Vista®
operating system.
To remove the SD memory card
CAUTION
Remove the memory card before you turn off the document camera.
CAUTION
Do not remove an SD memory card from the document camera unless the
connected projector or display shows the camera image.
TIP
For best results, use a USB 2.0 compliant cable.