User instructions – Smeg PL4107NE1 User Manual

Page 18

Advertising
background image

User instructions

17


TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT

Always try to run the dishwasher fully loaded.

Do not wash the dishes in running water.

Use the washing program that is most appropriate for each type of
load.

Do not carry out any preliminary rinsing.

If available, connect the dishwasher to a hot water supply up to
60°C.

When possible, skip the drying cycle by leaving the door open
when the washing cycle is complete; the air and the residual heat
will dry the dishes perfectly.


TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT
THE ENVIRONMENT

The phosphates contained in dishwasher detergents are harmful to the
environment. To avoid using excessive amounts of detergent and to
save on electricity, observe the following:

separate the more delicate items from dishes that are more
resistant to aggressive detergents and high temperatures;

do not pour the detergent directly on the dishes.

REMOVING THE DISHES

program, wait at least 20 minutes before


washing

At the end of the
removing the dishes, to allow them to cool down. To prevent any water
droplets on the upper basket from falling on the dishes in the lower
basket, it is advisable to unload the lower basket first, and then the
upper basket.

Advertising
This manual is related to the following products: