Backboard mounting (continued), Height adjustment and warning label placement, Warning – Spalding M316001 User Manual

Page 15

Advertising
background image

01/07

ID# M316001

15

Owner must ensure that all players know and follow these rules

for safe operation of the system.

WARNING

• DO NOT HANG on the rim or any part of the system including

backboard, support braces or net.

• During play, especially when performing dunk type activities,

keep player's face away from the backboard, rim and net.
Serious injury could occur if teeth/face come in contact with
backboard, rim or net.

• Do not slide, climb, shake or play on base and/or pole.
• When adjusting height or moving system, keep hands and

fingers away from moving parts.

• Do not allow children to move or adjust system.
• During play, do not wear jewelry (rings, watches, necklaces,

etc.). Objects may entangle in net.

• Keep organic material away from pole base. Grass, litter, etc.

could cause corrosion and/or deterioration.

• Check pole system for signs of corrosion (rust, pitting,

chipping) and repaint with exterior enamel paint. If rust has
penetrated through the steel anywhere, replace pole
immediately.

• Check system before each use for proper ballast, loose

hardware, excessive wear and signs corrosion and repair
before use.

• Check system before each use for instability.
• Never play on damaged equipment.
• Keep pole top covered with cap at all times.
• See instruction manual for proper installation and

maintenance.

R

ead and understand warnings listed

below before using this product.

F

ailure to follow these warnings may

result in serious injury and/or
property damage.

ID#: 588000 05/05

In the U.S.: 1-888-713-5488

In the U.S.: 1-800-558-5234
In Canada: 1-800-284-8339

In the U.S.: 1-800-334-9111

In the U.S.: 1-800-558-5234
In Canada: 1-800-284-8339

Adhere WARNING label (20) in

a clearly visible place.

NOTE:

7

10 ft.

(3.05 m)

REGULATION RIM HEIGHT

IS 10 FEET (3.05 m).

ATTACH A STEEL-FRAMED STYLE BACKBOARD (STYLE WILL VARY)

BACKBOARD MOUNTING (continued)

25

15

15

6

15

6

15

25

8

8

3.

Attach backboard using hardware
shown.

Folow instructions that are packaged
with backboard for specific assembly
details.

Crank

Hook

TO ADJUST BACKBOARD:

Position looped end of

crank onto hook as shown.

Rotate crank handle to

raise or lower backboard

HEIGHT ADJUSTMENT AND WARNING LABEL PLACEMENT

OR

22

Advertising