Symbol Technologies PDT 8000 Series - Manual (Page 24)

22
P D T 8 0 0 0 S e r i e s
information, see the communication instructions in the PDT 8000
Series Product Reference Guide.
Communicating with Printers
To print from a standard printer:
1. Attach the snap-on-printer cable to the serial port in the bot-
tom of the terminal.
2. Attach the other end of the cable to the Data Communica-
tions Connector on the printer.
3. Run the application's print function.
To print from an IrDA-compliant printer:
1. Point the IrDA port on the back of the terminal at the IrDA
port on the printer, at a maximum distance of 39 inches.
2. Run the application's print function.
Note: The terminal must have software configured to com-
municate with the printer you are using.