Sony 4-114-858-12(1) - Manual (Page 9)

9
Ge
tt
in
g
S
ta
rte
d
Step 2: Attaching the supplied microphone and
the lens hood with lens cover
When you use the supplied microphone
(ECM-XM1) for recording sound, do the
following steps.
1
Attach the wind screen B to the
supplied microphone A.
2
Place the microphone A in the
microphone holder C with the
model name facing upward, close
the cover, and shut the clamp.
3
Connect the plug of the
microphone to the INPUT1 jack
D.
4
Put the microphone cable into the
cable holder E.
5
Select channels with the CH1 (INT
MIC/INPUT1) switch F and the
CH2 (INT MIC/INPUT1/INPUT2)
switch G.
See the table below for the recording
channels.
Attaching the supplied
microphone
Put the cable in the outer cable holder.
Continued ,