Woodstock SHOP FOX M1014 - Manual (Page 12)

-10-
M1014 7" x 12" Metal Cutting Bandsaw
SE
T
U
P
KEEP the power cord UNPLUGGED
during assembly or adjustment tasks!
Otherwise, serious personal injury to
you or others may occur!
READ and understand this entire instruc-
tion manual before using this machine.
Serious personal injury may occur if
safety and operational information is not
understood and followed. DO NOT risk
your safety by not reading!
SET UP
The following items are needed, but not included, to set
up your machine:
• An Assistant.
• Phillips Screwdriver #2.
• Standard Screwdriver #2.
• Hex Wrench 6mm.
• Open-End Wrench 6mm, 12mm, 14mm, 19mm.
• Open-End Wrench 3/8", 7/16", 1/2."
Items Needed for Set Up
SEEK assistance when lifting the
machine from the box it was shipped
in. The SHOP FOX ® Model M1014 is a
heavy machine.
This machine has been carefully packaged for safe
transportation. If you notice the machine has been
damaged during shipping, please contact your authorized
Shop Fox dealer immediately.
Unpacking