Samsung HT-P38 - Manual (Page 31)

ENG
60
To tune in to a preset station, press on the
remote control to select a channel.
• Refer to Step 2 on page 59 to
automatically or manually tune in
to a station.
2 1
• Each time the button is pressed,
the band switches between
"FM ➝ AM". • “PRGM” flashes in the display.
3
Example: Presetting FM 89.1 in the memory
Press TUNING/CH
to select "89.10".
Press the TUNER
button and select the
FM band.
• Press the TUNER MEMORY button before
‘PRGM’ disappears from the display.
• ‘PRGM’ disappears from the display and
the station is stored in memory.
5 4
• You can select between 1 and
15.
Press the TUNER
MEMORY button.
Press the TUNER
MEMORY button
again.
6 To preset another
station, repeat
steps 2 to 5. Press
to select preset
number.
RADIO OPERA
TION
You can store up to:
15 FM stations
15 AM stations • FM Frequency Modulation
• AM Medium Wave
Presetting Stations
59
2 1
• The selection toggles back and
forth between "FM
➝ AM" each
time the TUNER button is
pressed.
Tune in to the
desired station.
Press TUNER
button.
Automatic Tuning 2
Manual Tuning
2 1 Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
Press the Function
button to select the
desired band (FM,
AM).
Press the STOP ( ) button
to select "MANUAL" and
then press and hold button to
automatically search the band.
Automatic Tuning 2
Press STOP ( ) to select
MANUAL and then briefly
press to tune in to a lower or
higher frequency.
Manual Tuning
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
When is pressed, a
preset broadcast station is
selected.
Press and hold TUNING/CH
button to automatically search for
active broadcasting stations.
Briefly press TUNING/CH button
to increase or decrease the
frequency incrementally.
Automatic Tuning 1
Remote Control Unit
Main Unit
You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or
manual tuning operation.
Listening to Radio
• Up to 15 stations (30 total ; 15FM, 15AM) can be saved in memory.
If you save more than 15 stations, the oldest station previously saved is removed
and a new station is stored in its place. Note