Sanyo SCP-6600 - Manual (Page 75)

69 8. Personal Organiser
Using Your Phone’s Alarm Clock
To use the alarm clock:
1. Select > Tools > Alarm Clock.
Note: A caution notification may appear. If you don’t want this caution to be
displayed ever again, press before pressing Continue (left softkey).
2. Select a number, press , and then enter the following items.
Ⅲ Description to enter a description of the alarm (up to 14
characters).
Ⅲ Time to enter the alarm time. Enter the desired alarm time
and press
.
Ⅲ Repeat to select the alarm frequency.
Ⅲ Alarm to set the alarm on/off.
3. Press Save (left softkey) to save the alarm settings.
4. Press Settings (right softkey), and then use your keypad and/or
navigation key to set the Ringer Length, Snooze Interval or
Snooze Times.
5. Press Done (left softkey).
Tip: Press On/Off (left softkey) to toggle the alarm on and off.
Note: Alarm will not sound when the phone is powered off.
To stop the alarm:
ᮣ Press any key to stop the alarm. (The alarm will stop and then
sound again after the selected snooze interval.)
Ⅲ Press and hold the side camera key to cancel the snooze
setting.
Ⅲ Press Dismiss (right softkey) to dismiss the alarm.
Note: In a no-service area, it’s necessary to set the actual time and date to use
the Alarm Clock function after turning off and on your phone.