Sony RDR-HX680 - Manual (Page 102)

102
Aerial Reception
Settings (Tuner)
You can make tuner and programme
position settings for the recorder.
Auto Scan
If you connect a TV to this recorder not
using SMARTLINK, you can preset
programme positions automatically using
“Auto Scan.”
Select your country/region using
</,,
and press ENTER.
The programme position order will be set
according to the country/region you set.
If any programme positions are unused or
contain unwanted channels, you can disable
them (page 102).
Download from TV
If you connect a TV to this recorder with
SMARTLINK, you can preset programme
positions by downloading from your TV.
For details, refer to the operating
instructions supplied with your TV.
Select your country/region using
</,,
and press ENTER.
The tuner preset data will be downloaded
from your TV to this recorder.
If any programme positions are unused or
contain unwanted channels, you can disable
them (page 102).
Presets programme positions manually.
If some programme positions could not be
set using the “Easy Setup” function, you can
set them manually.
If there is no sound or if the picture is
distorted, the wrong tuner system may have
been preset during “Easy Setup.” Set the
correct tuner system manually in the steps
below.
1
Select your country/region using </
,, and press ENTER.
2
Press PROG +/– to select the
programme position.
3
Select the item you want to change using
M/m, and change the settings using </
,, then press ENTER.
• To preset another programme position,
repeat from step 2.
Skip
Auto Channel Setting
Manual CH Setting
On Select this when the
programme position is unused
or contains unwanted
programme positions.
The selected position will be
skipped when you press
PROG +/–.
Off Does not skip the selected
programme position.
Programme position