Sony PAL NTSC 4.43 SLV-SE80UX - Manual (Page 70)

Editing 70
Audio dubbing
This feature lets you record over the
normal audio track. The monaural
sound previously recorded is replaced
while the original hi-fi sound remains
unchanged. Use this feature to add
commentary to a tape that you have
recorded with a camcorder.
Before you start…
• Connect a playback source to the
LINE-2 IN AUDIO L/R jacks on the
front panel.
• Turn on the TV and set it to the video
channel.
AUDIO DUB
1
Insert a source tape into the stereo system (or the playback VCR).
Search for the point to start playback and set it to playback pause.
2
Insert a prerecorded tape with its safety tab in place into this
(recording) VCR. Search for the end of the section to be replaced and
press P PAUSE.
3
Press CLEAR to reset the counter to “0H00M00S.”
4
Rewind the prerecorded tape to the beginning of the section to be
replaced.
The VCR enters pause mode.
P PAUSE
CLEAR
1 2 3
4 5 6
7 8 9
0