Sony KP 53HS10 - Manual (Page 61)

57
D:\JN\KP-53HS10\KP53HS10GB\407416311KP53HS10USA\02US-KP53HS10USA\11TRB.fm masterpage:Right
Ad
dit
iona
l Inf
o
rm
a
tion
Model name1[KP-53HS10] Model name2[KP-61HS10]
[4-074-163-11 (1)]
b Check the connections between the DTV receiver
and the projection TV. (see pages 11 and 12)
b Check your local listings to find out if you can
receive digital broadcasts in your area.
b Check the DTV INPUT setting in the SET UP
menu. (see “DTV INPUT” on page 43)
b Make sure CABLE is OFF in the CHANNEL SET
UP menu. (see “CABLE” on page 38)
b Use AUTO PROGRAM to add receivable channels
that are not presently in the TV’s memory. (see
“AUTO PROGRAM” on page 38)
b Adjust the COLOR in the VIDEO menu. (see
“COLOR” on page 34)
b Black and white programs cannot be seen in color.
b Perform AUTO SET UP again using the SET UP
button to return to the factory preset condition. (see
“To perform AUTO SET UP again” on page 24)
b Check the CABLE setting in the CHANNEL SET
UP menu. (see “CABLE” on page 38)
b Check the antenna/cable connections.
b Make sure the channel is broadcasting programs.
b Press ANT to change the input mode. (see “ANT”
on page 25)
b Adjust the antenna.
b Keep the projection TV away from noise sources
such as cars, neon signs or hair-dryers.
b Use AUTO PROGRAM to add receivable channels
that are not presently in TV’s memory. (see “AUTO
PROGRAM” on page 38)
b Try turning CHANNEL FIX off. (see “CHANNEL
FIX” on page 38)
b Use a highly directional outdoor antenna or a cable
(when the problem is caused by reflections from
nearby mountains or tall buildings).
b If the item you want to choose appears in gray, you
cannot select it.
b Press the projection TV’s power button off and on
again.
b Check the connection with a cable box again. (see
pages 8 and 10)
b Make sure CABLE is ON in the CHANNEL SET
UP menu. (see “CABLE” on page 38)
b Use AUTO PROGRAM to add receivable channels
that are not presently in the TV’s memory. (see
“AUTO PROGRAM” on page 38)
b Increase the volume at the cable box. Then press
TV (FUNCTION) and adjust the projection TV’s
volume.
b Make sure CABLE is ON in the CHANNEL SET
UP menu. (see “CABLE” on page 38)
b Use AUTO PROGRAM to add receivable channels
that are not presently in the TV’s memory. (see
“AUTO PROGRAM” on page 38)
Cannot receive digital channels (when a
DTV receiver is connected)
The color of the digital TV program is not
correct
Cannot receive upper channels (UHF)
when using an antenna
No color
Only snow and noise appear on the
screen
Dotted lines or stripes
TV is fixed to one channel
Double images or ghosts
Cannot operate the menu
Cannot receive any channels when
using cable TV
Cannot gain enough volume when using
a cable box
CHANNEL INDEX does not display all
available channels
(continued)