Data of code – Sony Ericsson VPL-PX30 User Manual
Page 8
4
VPL-PX20/PX30
VPL-VW10HT
4. Data of Code
1
1
1
1
1
Start Condition
2
2
2
2
2
INDEX Header
/
*--
RECEIVER INDEX
--
*/
/
*--
SENDER INDEX
--
*/
/
*--
Command
--
*/
Note: CMD1 and CMD2 are assigned with different commands for each unit. Consequently,
there is no compatibility of commands between units. For details of the commands, refer
to the respective list of commands for the units. Since there is no index function of this
unit, the receiver INDEX will be ignored even if the command is designated.
3
3
3
3
3
Sub Data Size
Note: Error when 82 to FF hex codes are included.
4
4
4
4
4
Data Size 2
Note: Error when 01 to FF hex codes are included.
B1
B2
B3
B4
B5
PERIPHERAL INDEX
GROUP INDEX UPPER BYTE
GROUP INDEX LOWER BYTE
DEVICE INDEX UPPER BYTE
DEVICE INDEX LOWER BYTE
01
00
01
00
01
01: Projector
Group Index = 0001 hex
Device Index = 0001 hex
B6
B7
B8
B9
B10
PERIPHERAL INDEX
GROUP INDEX UPPER BYTE
GROUP INDEX LOWER BYTE
DEVICE INDEX UPPER BYTE
DEVICE INDEX LOWER BYTE
03
00
01
00
01 - 63
01: Controller
Group Index = 0001 hex
Device Index = 0001 - 0063 hex
B15
Data Length 2
00 0:
Fixed
B14
Data Length 1
02 81
(B16
+
2) hex Data Size
Bn
B0
NAME
Start Code
DATE
(hex)
A5
NOTE
Indicates the first packet
Projector All
LCD Projector All
VPL-PX20, VPL-PX30, VPL-VW10HT only
B11
B12
B13
CMD1
CMD2
CMD3
00
80
90
Refer to attached
Refer to attached