Ruger 77/50 - Manual (Page 39)

It is the purchaser’s responsibility to be absolutely
certain that any parts ordered from the factory are
correctly fitted and installed. Firearms are
complicated mechanisms and
IMPROPER
FITTING OF PARTS MAY RESULT IN A
DANGEROUS MALFUNCTION, DAMAGE TO THE
FIREARM, AND SERIOUS INJURY TO THE
SHOOTER AND OTHER PERSONS.
The
purchaser and installer of parts must accept full
responsibility for the correct adjustment and
functioning of the firearm after such installation.
PARTS MUST FIT CORRECTLY
39
ORDERING PARTS
All parts orders for the MODEL 77/50 rifle should be sent to: Sturm, Ruger &
Co., Inc., Product Service Department, 411 Sunapee Street, Newport, New
Hampshire, 03773. We cannot comply with open account or C.O.D. requests.
Payment in the form of a check, money order, Visa or Mastercard must
accompany your order. Credit Card orders must include the account number,
expiration date and whether it is a Visa or Mastercard account. Minimum parts
order is $1.00 plus a $3.50 shipping and handling charge. Order parts by Part
Number and Part Name and include the entire serial number of the firearm for
which the parts are being ordered. The price shown for parts does not include
the minimum net labor charge of $15.00 plus $5.00 shipping and handling
charge if the parts are factory fitted. All factory-fitted parts are fitted on an
exchange basis only. We will not return the replaced parts.
Because the receiver of the Model 77/50 rifle (part number J00110) is a serial
numbered component, it is defined as a “firearm” by Federal law and is not sold
as a separate component.
*Parts designated by an asterisk must be factory fitted. These parts are fitted on
an exchange basis only. We will not return the replaced parts. We will not return
any part that is broken, malfunctioning, badly worn or has been modified. See
“Warning — Parts Purchasers”, above.
CAUTION: A gun containing modified, broken, malfunctioning,
or badly worn parts should not be fired.
!
!
WARNING –PARTS PURCHASERS