Setting up the anynet+(hdmi-cec) (dvd-f1080 only), Setting up the anynet+ (hdmi-cec) (dvd-f1080 only) – Samsung DVD-F1080 EN User Manual
Page 30
30
• You can operate the DVD Player by using TV remote con-
trol. (TV buttons that can be used to control the DVD
Player :
,
,
,
, ,
and
,
buttons, buttons.
To make the setup menu disappear, press the
MENU button.
View TV
Select Device
®
Menu on Device
Device Operation
Setup
Receiver : Off
®
®
®
®
®
Record
®
Exit
Move
ENTER
DVDP
View TV
®
TV Menu
- Select Device : Use this option to select device.
- Menu on Device : Same as MENU button on the
DVD Player remote control.
- Device Operation : Same as INFO button on the
DVD Player remote control.
Note
• By pressing the PLAY button of the unit while
watching TV, the TV screen will change to the play
screen.
• If you play a DVD when the TV power is off, the TV
will power On.
• If you turn the TV off , the DVD Player will power
off automatically.
• If you change the HDMI to other sources
(Composite,Component,... etc) in TV while playing
the DVD disc, the DVD Player will stop playing.
Menu
Return
Enter
Language Setup
❿
❿
Audio Setup
❿
❿
Display Setup
❿
❿
Parental Setup :
❿
❿
DivX(R) Registration
❿
❿
Anynet+(HDMI-CEC) : On
Menu
Return
Enter
Language Setup
❿
❿
Audio Setup
❿
❿
Display Setup
❿
❿
Parental Setup :
❿
❿
DivX(R) Registration
❿
❿
Anynet+(HDMI-CEC) : On
3. Press the
➐
➐/❷
❷ buttons to select Anynet+(HDMI-CEC),
then press the
❿ or ENTER button.
4. Set the Anynet+(HDMI-CEC) to “On” on your DVD Player,
then press the
❿ or ENTER button.
5. Set the Anynet+ function at your TV. (See the TV instruction
manual for more information.).
• When you press Anynet+ button on the TV remote
control, the below OSD will appear.
Setting Up the Anynet+
(HDMI-CEC) (DVD-F1080 only)
Anynet+ is a function that can be used to operate
the unit using a Samsung TV remote control, by
connecting the DVD F1080 to a SAMSUNG TV
using a HDMI Cable.(see page 12) (This is only
available with SAMSUNG TVs that support
Anynet+).
Select On when you connecting the DVD-Player
with Samsung TV that support Anynet+.
1. With the unit in Stop mode, press the MENU button.
2. Press the
➐
➐/❷
❷ buttons to select Setup, then press the ❿
or ENTER button.
Menu
Return
Enter
Language Setup
❿
❿
Audio Setup
❿
❿
Display Setup
❿
❿
Parental Setup :
❿
❿
DivX(R) Registration
❿
❿
Anynet+(HDMI-CEC) : On
Off
√ On