Samsung HT-C463-XAC - Manual (Page 18)

18
English
Connections
Connecting the Video Out to your TV
Choose one of the three methods for connecting to a TV.
METHOD 1 : HDMI
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied)
from the COMPONENT OUT (Pr, Pb and Y) jacks on the back of the product to the Component Video Input
jacks on your TV.
METHOD 3 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack
on your TV.
NOTE
Resolutions available for the HDMI output are 480p, 720p,1080i/1080p. See page 23 for the resolution setting.
This product operates in Interlace scan mode 480i for component/composite output.
After making the video connection, set the Video input source on your TV to match the corresponding Video
output mode on your product.
Turn this product on fi rst before you set the video input source on your TV. See your TV owner's manual for
more information on how to select the TV's Video Input source.
CAUTION
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
✎



!

HDMI OUT
AUX IN
COMPONENT
OUT
VIDEO
OUT
FM ANT
AUX IN
FM ANT
METHOD 1
METHOD 2
Green
Blue
Red
METHOD 3 (supplied)
HT-C463-XAC_ENG-0304.indd 18 HT-C463-XAC_ENG-0304.indd 18 2010-03-04 9:20:55 2010-03-04 9:20:55