Samsung SSC14WEB - Manual (Page 36)

Eng-36
4) When the PPPoE (ADSL) type in the User Name and Password (and Confirm Password)
given to you by the ADSL Service Provider.
CAUTION
In case of using ADSL (ISP-internet service provider, you must type correct User Name
and Password by ISP to connect to SSC14WEB. If you type incorrect User Name or
Password, you can not see the image transferred from SSC14WEB.
5) USER ID and PWS can be 40 digits maximum. Only the Arabic numerals,@ and small
characters can be used.
Please that capital letters are not supported when you get USER ID AND PWS from
ADSL Service Provider.
6) DNS 1 and DNS 2 will be automatically set to DNS as shown below.
7) Use œ œ, √ √ KEY to change it.
8) After setting, move to the main screen by using the MENU BOTTOM.
9) Set values will be stored as shown below. It takes 2 or 3 seconds.
On completion of setting to PPPoE(ADSL)setup, the screen, [P] is displayed.
If the network connection is cancelled or cut, [P] starts blinking.
06/01/03 13:14:00
PPPoE... ACCESS
DNS 1 168.126.63.001
DNS 2 168.126.63.002
USER ID ********
USER PWD ********
06/01/03 13:14:00
NETWORK SETTING
IP and PASSWORD can be inputted to 40 characters in the maximum.
[P] 13:14:00
CAM1