Stinger CT100 - Manual (Page 9)

1. To Remove Bug Basket. Turn Bug Basket handle
clockwise so the arrow on the Bug Basket aligns
with the “Unlocked” symbol ( ) on the top of the
Vacuum head (Figure 15). (The Bug Basket is
designed to twist close so that no live mosquitoes can
escape when the Bug Basket is removed). Pull
straight up. CHECK BUG BASKET ( ) indicator will
light RED while Bug Basket is removed.
2. To Empty/Clean Bug Basket. Unhook the small latch
on the bottom mesh door and empty mosquitoes
(Figures 16 & 17). Gently tap Bug Basket on the
ground to completely empty. If mosquitoes are still
alive, leave Bug Basket in the sun for a few hours so
the insects dehydrate. Empty as described above. If
necessary, use small brush to remove any debris.
3. To Replace Bug Basket. Ensure bottom mesh door
of Bug Basket is snapped securely in place, and the
Basket is in the closed position. Line up the arrow on
the Bug Basket with the “Unlocked” symbol ( ) on
the top of the Vacuum head and drop the Bug Basket
in the intake area. Turn the Bug Basket handle
counter-clockwise until the arrow on the Bug
Basket aligns with the “Locked” symbol ( ) on the
Vacuum head (Figure 18). The Bug Basket will twist
open and be ready to capture mosquitoes as you lock
it in place.
Figure 15
ASSEMBLY
(Continued)
REMOVE/CLEAN BUG BASKET
Figure 16 Figure 16
Figure 18
Figure 17 Figure 17
9
CT100_OM.qx 2/9/07 2:19 PM Page 9