Sennheiser SK 500 G3 - Manual (Page 28)

27
Adjusting settings via the operating menu
Adjusting the contrast of the display panel –
“LCD Contrast“
You can adjust the contrast of the display panel in 16 steps.
Resetting the settings made in the operating menu –
“Reset”
When resetting the settings made in the operating menu,
only the selected settings for the pilot tone and for the
frequency banks “
U1 ” to “ U6 ” remain unchanged. For an
overview of the factory-preset default settings, refer to the
supplied frequency information sheet.
Displaying the software revision – “Software Revision”
You can display the current software revision of the body-
pack transmitter.
̈
For information on software updates, visit the
SK 500 G3 product page at www.sennheiser.com.
Select the desired
setting; apply the
setting Call up “Reset”
Advanced Menu
Reset Yes
Reset
“Stored”
SET
SET