Sharp XL-S10 - Manual (Page 16)

03/12/18 XL-S10(U)2.fm
16
XL-S10
TINSEA018SJZZ
CD Playb
ack
Listening to a CD (continued)
" Repeat or Random play
You can select one of the CD playback mode; "Repeat play", "Ran-
dom play" and "Normal play".
To repeat a programmed sequence:
Perform steps 1 - 4 in the "Programmed Play" section and then
select the repeat playback.
Notes:
! The random play will stop automatically when all tracks are
played once. (The same track will not be played back twice.)
! In random play, the CD player will select and play tracks auto-
matically. (You cannot select the order of the tracks.)
! If you press the button during random play, you can move to
the track selected next by the random operation. On the other
hand, the
button does not allow you to move to the previous
track. The beginning of the track being played will be located.
Caution:
After performing repeat play or random repeat play, be sure to press
the button. Otherwise, the disc will play continuously.
To cancel repeat or random play:
Press the RANDOM/REPEAT button on the remote control repeat-
edly to select the normal playback mode.
1 When in the CD mode, press the RANDOM/REPEAT button
on the remote control repeatedly to select the playback
mode.
Normal playback
mode
Random playback
mode
Random repeat play-
back mode
Repeat playback
mode
2 Press the button to start playback.