Sharp FODC600 - Manual (Page 100)

Installing the Network Scanner Software
98
2
Enter any name you wish for the Process Definition Prefix and any letter for
Initial, and click Next. Click Help for detailed information.
•
The name of your computer initially appears in the Prefix box. If you wish to
change the prefix, enter a name in 6 characters.
•
Enter any letter for the Initial (the initial is not used on the FO-DC500/600,
however, an entry is necessary).
•
The Process Definition defines instructions for how the image will be
processed once it arrives at the computer.
3
Check the Process Definitions you wish to use and click Next.
•
Network Scanner Tool is shipped with 3 pre-defined sets of instructions
called Process Definitions if you install both Sharpdesk and Network
Scanner Tool. The “Process Definition Prefix” that was set in Step 2
appears in the displayed name of each process (“Sharp” is used for the
prefix in the examples below).