Speco Technologies VM22TSLCD - Manual (Page 16)

16
PTZ Preset Function ID corresponding table
Preset ID ID + Call ID + Set count to 3 seconds
33 180 degree rotating
34 Speed dome return to zero
76 Start auto pan
92 Set line scan left stop
93 Set line scan right stop
95 Speed dome OSD Menu
96 Stop line scan
99 Start line scan
Pan / Tile Control Mode: Center / Finger.
Center mode: the cross symbol is always on the middle of screen and it is the center point
Finger mode: when the hand touches the LCD in the beginning, that touch position is the
center. The center position is released until finger left.
Preset ID + Set button (count to 3 seconds) = Set Preset Function
Preset ID + Call button = Call Preset Function
Preset ID + Clear button to delete preset one by one
Touch the Clear button (count to 3 seconds) to delete all presets
Touch the panel to move item or change value when PTZ OSD on
Touch the IRIS Open button into main or sub menu
Touch the panel to move item to EXIT and then touch the IRIS Open button to quit OSD