Sanyo DS27510 User Manual
Page 6
6
➀
Mode Keys
Use these keys to program the remote
control and to select the operating
mode (VCR, TV, or AUX).
➁
Input Key
Press to select the program source to
be displayed on the screen: TV signal
or signal from the equipment you have
connected to the A / V jacks.
➂
Number Keys
Two keys must be pressed to select a
channel. Example: Press 0 then 6 to
select channel 6. For cable channels
100 through 125, press and hold the
1 key until C1– – appears. Then press
the other two numbers.
➃
Caption Key (See page 14.)
➄
Menu Key
Use this key with the
/
and
/
keys to navigate and adjust
features of the on-screen menu system
(see pages 9 ~ 11).
➅
Channel (CH) Scanning (
/
)
and Volume (
/
) Keys
Press to scan through the channels in
memory and to adjust the volume.
➆
Mute Key
Press once to minimize the volume.
Press again to restore.
Note: When using the audio out jacks
this key will not mute the sound.
➇
VCR Keys
These keys control the VCR’s Fast
Forward (
), Rewind (
),
Play (
), Record (
),
Stop (
), and Pause (
)
functions.
➈
V-Guide Key (See pages 12 ~13.)
➉
Reset Key
Press this key twice to restore factory
settings. The TV will automatically
start Channel Search and clear all cus-
tomized settings. (See page 15.)
Power Key
Press to turn TV on or off.
Sleep Key
Use this key with the “0” key to set the
Sleep Timer (see page 15).
Recall Key
Select a channel then select another
channel using the number keys. Press
Recall to switch between the channels.
Display Key
Press once to display the channel
number. Press twice to display the
channel number continuously. Press
again to remove the display.
Point towards TV
11
12
13
QuickTips
■
Make sure batteries
have been installed
correctly.
■
If the remote control
does not work: Press
T V key (see item 1).
■
The remote control
must be programmed
before it will operate
your VCR, DVD, or
Cable Box. See
pages 7~8.
■
Cannot select channel
with number keys.
Press “0” in front of
numbers 1 ~ 9.
Example: Channel 05.
■
The “C” in front of the
channel number indi-
cates a Cable channel.
■
Adjusting the volume
level: Right flashing
arrow indicates
volume is increasing
and left flashing arrow
indicates volume is
decreasing.
■
Channel number will
not display continu-
ously when captioning
is on.
■
Using V-Guide TV
Parental Guidelines
settings can be
changed only by using
the Remote Control.
See pages 12 ~ 13.
Need help?
visit our website at
www.sanyoctv.com
or
Call 1-800-877-5032
MULTIMEDIA REMOTE CONTROL KEYS
14
RECALL
DISPLAY
MUTE
PLAY
PAUSE
V-GUIDE
REC
STOP
MENU
CAPTION
SLEEP
RESET
INPUT
CH
VOL
VOL
POWER
VCR
TV
AUX
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
➀
➁
➂
➃
➄
➇
➅
➈
➆
➉
12
13
14
11
➠