Sony HD-RCX300 - Manual (Page 62)

62
US
(GENERAL SET) category
SOUND/DISP SET
VOLUME ............................ Adjusts the volume of playback sound (p. 30).
BEEP ................................... Sets whether the camcorder sounds operation beeps or not.
LCD BRIGHT ..................... Adjusts the brightness of the LCD screen.
LCD BL LEVEL .................. Adjusts the backlight of the LCD screen.
LCD COLOR ...................... Adjusts the color intensity of the LCD screen.
DISPLAY SET .................... Sets the duration that icons or indicators are displayed on the LCD screen.
OUTPUT SETTINGS
TV TYPE ............................. Converts the signal depending on the TV connected (p. 31).
COMPONENT .................. Select this option when you connect your camcorder to a TV with the
component input jack (p. 32).
HDMI RESOLUTION ....... Selects the output image resolution when connecting your camcorder to a
TV with an HDMI cable.
DISP OUTPUT .................. Sets whether the on-screen displays appears on the TV screen or not.
CLOCK/ LANG
CLOCK SET ....................... Sets the date and time (p. 18).
AREA SET .......................... Adjusts for a time difference without stopping the clock (p. 18).
AUTO CLOCK ADJ
* 1 ....... Sets whether the camcorder adjusts the clock automatically by acquiring
the time from GPS or not.
AUTO AREA ADJ * 1 ......... Sets whether the camcorder compensates for a time differences
automatically by acquiring the current location information from GPS or
not.
DST SET/
SUMMERTIME ................. Sets the DST SET (p. 18).
LANGUAGE SET ......... Sets the display language (p. 19).
POWER SETTINGS
A.SHUT OFF ..................... Changes the [A.SHUT OFF] setting (p. 17).
POWER ON BY LCD ....... Sets whether or not the camcorder is turned on and off when you open
and close the LCD screen.
OTHER SETTINGS
DEMO MODE................... Sets whether the demonstration appears or not.
CALIBRATION .................. Calibrates the touch panel.
CTRL FOR HDMI ............. Sets whether or not the TV’s Remote Commander is to be used when
the camcorder is connected to a “BRAVIA” Sync compatible TV with the
HDMI cable (sold separately).
DROP SENSOR* 3 ............. Activates or deactivates the drop sensor.
REC LAMP ......................... Sets REC LAMP to light up or not.
REMOTE CTRL ................. Sets whether the Wireless Remote Commander is to be used or not.
* 1 HDR-CX350V/XR350V
* 2 HDR-CX300/CX350/CX350V/CX370
* 3 HDR-XR350/XR350V