StarTech.com MATRIX SV3254DX4I - Manual (Page 6)

1
Installation
Package Contents
This package should contain:
1 x CAT5 Multi-user KVM •
1 x Power Cord •
1 x Rack Mounting Hardware •
1 x Instruction Manual •
Required Cables and Hardware
Depending on your needs, you may need one or more of the following
cables. Please note that the corresponding StarTech.com part numbers
are listed in brackets:
All applications:
For connection to a LAN: 1 x Straight-through Ethernet patch cable
(M45PATCHxxxx)
DB9F to RJ45F Adapter (GC98FF, GC98MF)
PS/2 Server Interface Module for Enterprise Series (SV5PS2M)
USB Server Interface Module for Enterprise Series (SV5USBM)
Hardware Installation
To connect the KVM Remote Control Unit to the Host Computer and
Network:
Using a Category 5 Ethernet patch cable, connect the LAN connector 1.
on the rear panel of the SVxx54DX4I to a network data jack (usually
on a hub, switch, router, or pre-wired wall jack).
Connect a standard PS/2 or USB keyboard to the Local Keyboard port 2.
on the rear panel of the SVxx54DX4I.
Connect a standard PS/2 or USB mouse to the Local Mouse port on 3.