Sony Atrac3/MP3 CD Walkman D-NE20 - Manual (Page 24)

Changing Sound
Quality
For details about the setting of SOUND items,
see  page 25.
Selecting the sound
quality
You can set up the “EQUALIZER” setting
and/or “CLEARBASS” setting. If you set
both at the same time, you can enjoy more
bass sound along with the sound quality you
want.
1
Turn the function dial on the remote
to select SOUND.
2
Press the function button
repeatedly until “EQUALIZER” or
“CLEARBASS” appears.
3
Press  .
4
Turn the operation dial toward 
or  to select the sound quality
you want.
5
Press  .
Customizing sound quality
You can adjust sound quality for each
frequency range individually, checking the
shape of the wave on the display.
1
Turn the function dial on the remote
to select SOUND, and then press
the function button repeatedly until
“EQUALIZER” appears and press
 .
2
Turn the operation dial toward
 or  repeatedly to select
“CUSTOM” and press  .
3
Turn and hold the operation dial
toward  or  for 2 seconds or
more until the frequency range you
want to set up appears.
“Low” is displayed first.
There are 3 frequency ranges; “Low”
(low range audio), “Mid” (middle range
audio), and “Hi” (high range audio).
4
Turn the operation dial toward 
or  repeatedly to select the
shape of the wave.
There are 3 shapes stored in memory for
each frequency range.
Frequency range
5
Turn the VOL +/– control repeatedly
to select the sound volume.
The sound volume can be adjusted in 7
levels.
Sound volume
6
Repeat steps 3 to 5 to make
adjustment for the remaining 2
frequency ranges.
7
Press  .
To return to the previous screen
Press  on the remote.
To cancel the adjustment operation
Press  on the remote for 2 seconds or more.
Notes
• If the sound is distorted by your sound settings
when you turn up the volume, turn the volume
down.
• If you feel a difference in sound volume between
the “CUSTOM” sound setting and other sound
settings, adjust the volume to your preference.
24
D-NE20/NE20LS.GB.2-318-320-15(1)