SEH Computertechnik ISD300 - Manual (Page 45)

ISD300 User Manual
ISD300 User Manual
Using ISD300 as DHCP / DNS Server
45
Table: Parameter Settings - DHCP Server
Parameter Description
Address ranges
Start Address
End Address
‘IP Address Range’ is the range that supplies
DHCP leases to DHCP clients. Up to four
ranges are supported. These can be used to set
exclusion ranges. When a DHCP range is
created, a ‘Start Address’ and an ‘End Address’
need to be entered. Once created, a range
cannot be modified. To modify range settings,
the range must be deleted and a new range
defined.
Fixed IP addresses
MAC Address
IP-Address
Hostname
Hosts receive their explicitly-reserved IP
addresses from the DHCP server. Up to ten IP
addresses may be reserved. For this, the host
requires the following information:
- MAC Address
- IP-Address
- Hostname
To modify host settings, the host must be
deleted and a new host defined.
DHCP Options
These data are equally used for all ranges and hosts. Several server
addresses are separated by a comma.
Lease time The time, in seconds or hours that a DHCP
lease should be provided a host.
A lease is the length of time that a DHCP server
specifies that a client computer can use an
assigned IP address.
Subnet mask The subnet from which to serve the IP
addresses
Broadcast address Broadcast address
Default routers Default routers