Speco Technologies EZVR4 - Manual (Page 14)

14
Main MENU – Auto Record
Use direction buttons to select Auto Record.
Press the Enter button to choose On or Off.
If switched to OFF then Auto Record is
disabled.
When Auto Record is set to On, the EZVR4
will start recording again after 2 minutes of
inactivity after being manually stopped.
Main MENU – Overwrite HDD
Use direction buttons to select Overwrite
Enable. Press the Enter button to choose
Yes or No.
NO - Recording stops when the Hard
Drive is full
YES – Recording continues to overwrite the
oldest information after the Hard Drive is full