Sony DG2 - Manual (Page 7)

7
Checking that the Digital PCLink is selected
as preferred device
With USB technology, there is never any need to turn your computer
off when unplugging or plugging in the Digital PCLink. When you
want to use the Digital PCLink simply close any running programs
and plug it into the USB port. Your system will automatically
configure itself. When you are done, you can unplug the Digital
PCLink and your computer will automatically configure for whatever
soundcard is installed. In both cases, it does not matter if the system
is on or off. For smooth automatic loading, please ensure all audio
programs are closed before plugging in, or unplugging the Digital
PCLink.
Note
When the Digital PCLink is selected as your system’s preferred audio device,
no sound will come out of any speakers plugged into your soundcard. If you
wish to use your soundcard instead of the Digital PCLink either unplug the
Digital PCLink from the USB cable, or select your soundcard as preferred
audio device in the Multimedia Properties control panel for Windows 98, or
Sounds and Multimedia control panel for Windows Me and Windows 2000.
It is not possible to use a soundcard and the Digital PCLink at the same time.
Windows 98
Once Windows 98 starts and the appropriate drivers have been
loaded, the Digital PCLink will automatically be set as your system’s
preferred audio device. To verify this, open the Multimedia Control
Panel and make sure that USB Audio Device appears in the Sound
Playback section under Preferred Device. To get to the Multimedia
Control Panel hit Start, then go to Settings, then Control Panel.
The multimedia icon will be in the Control Panel window. Double
click on the icon to open the Multimedia Properties window. In the
Audio tab, under the heading Sound Playback Preferred Device,
make sure that USB Audio Device appears. If it does not, use the
scroll arrow to the right and choose USB Audio Device. You are
now fully loaded.