Sony DG2 - Manual (Page 9)

9
Controlling the output and volume levels
The Digital PCLink’s volume and output controls can be accessed by
double clicking on the speaker icon at the bottom right hand side of
the Windows task bar. The volume for the Digital PCLink is set by
the Wave Volume slider, which is the only slider that the Digital
PCLink uses. If there are other sliders visible, go to Options and
then Properties. In the bottom section of the Properties window,
make sure a check appears only next to Wave Volume. Click on OK
once you are done.
MacOS 9.04 Users
MacOS 9.04 installation
1
Before plugging in the Digital PCLink for the first time, you will
need to ensure that your computer is running the necessary
operating system and Apple Audio Extensions.
2
To verify that your computer is running the correct operating
system, close all open applications. Click on the Apple icon in
the top right had corner of the screen. Scroll down to the first
item in the pop up menu called About This Computer and click
on it. A window with details of the operating system currently
running on your computer will now open. Verify that in the
version line a number 9.04 or higher appears. If this, or a higher
number appears, you are running an operating system that is
compatible with the Digital PCLink.
If you are running an earlier version of the Macintosh operating
system, your Digital PCLink may not operate.
continued