Sound Performance Lab MixDreamXP Model 2591 - Manual (Page 6)

6 MixDream XP
It makes good sense to think about where you place your
MixDream XP before connecting it. It should be positioned so
that you can easily reach it, but there are other considerations.
Try not to place it near heat sources or in direct sunlight,
and avoid exposure to excessive vibrations, dust, heat, cold
or moisture. It should also be kept away from transformers,
motors, power amplifiers and digital processors.
IMPORTANT: Adjust the voltage setting on the rear panel so
that it corresponds to your local power conditions! Before
connecting the MixDream XP or any other equipment turn off
all power!
• Do not open the case. You may risk electric shock and damage
to your equipment.
• Leave repairs and maintenance to a qualified service techni-
cian. Should foreign objects fall inside the case, contact your
authorized dealer or support person.
• To avoid electric shock or fire hazards, do not expose your
unit to rain or moisture.
• In case of lightning, unplug the unit.
• Always unplug the cable by pulling on the plug only; never
pull on the cable.
• Never force a switch or knob.
• Use a soft, lint-free cloth to clean the case. Avoid cleaning
agents as they may damage the unit. if necessary, use an
acid-free cleaning oil instead.
Before You Begin
230 V – 50 Hz/315 mA
115 V – 60 Hz/630 mA
VOLTAGE/FUSE