Changing the remote control code, Press [setup] to show the menus, Press [ 3 , 4 ] to select “set up” and press [ 1 – Samsung DVD-R4000 User Manual
Page 45: Press [setup
45
DVD-R4000
Adv
an
c
ed ope
ra
tion
Changing the remote control code
1
While stopped
Press [SETUP] to show the menus.
2
Press [3, 4] to select “Set Up” and
press [1].
3
Press [3, 4] to select “Remote Con-
trol Code” and press [ENTER].
4
Press [3, 4] to select the code (1, 2,
or 3) and press [ENTER].
The remote control code on the unit has been set.
5
While pressing [ENTER] on the
remote control, press the numbered
button ([1], [2] or [3]) corresponding
to the code you selected in step 4.
The remote control code on the remote control has been set.
6
Press [SETUP]
The following display appears when you use a remote control with
a different code.
If you are trying to use this unit’s remote control, change its code to
match the unit’s (➜ step 5).
3, 4, 2, 1
ENTER
Numbered
buttons
TAB
SELECT
Antenna System
Auto Channel Setting
Channel Caption
Preset Channel Caption
Manual Channel Caption
VCR Plus
i CH Setting
CATV
Channel
SETUP
RETURN
Set Up
Disc
Video
Audio
Display
TV Screen
The unit’s remote control code