Sony MHC-LX10000 - Manual (Page 11)

Disc – Pla
y
bac
k
11 US
Notes
• You cannot change the play mode during playback.
• The following discs take a longer time to start
playback.
– a disc recorded with complicated tree structure.
– a disc recorded in Multi Session.
– a disc to which data can be added (non-finalized
disc).
• When the disc is loaded, the system reads all the
tracks on that disc. If there are many albums or non-
MP3 audio tracks on the disc, it may take a longer
time for playback to begin or for the next MP3 audio
tracks to start playback.
• You are recommended not to save other types of
tracks or unnecessary albums on a disc that has MP3
audio tracks.
• Attempting to play back non-MP3 format files that
have the extension “.MP3” may result in noise or
malfunction.
• The system can play back to a depth of 8 folders
only.
• When naming the MP3 audio tracks, be sure to add
the file extension “.MP3” to the file name.
• An album that does not include an MP3 audio track
is skipped.
• If you save up the extension “.MP3” to a track other
than MP3 audio tracks, the system cannot recognize
the track properly and will generate a random noise
which could damage your speaker.
• The maximum number of albums on a disc which can
be recognize by this system is 150 (including root
album).
• The maximum number of MP3 audio tracks and
albums on a disc which can be recognize by this
system is 300.
• Depending on the encoding/writing software,
recording device, or the recording media used at the
time an MP3 audio track is recorded, you may
encounter problems such as cannot play back, sound
interruptions and noise.
Tips
• When you press CD or one of the DISC 1 ~ 3 buttons
to switch to “CD” function from “TUNER” function,
you may require a longer time to access the disc. In
the case, set the CD power manage function to “CD
POWER ON” (page 14).
• If you press CD while the system is turned off, the
system turns on automatically and “CD” is selected
as the function.
• You can also press FUNCTION on the remote
repeatedly to select “CD”.
• During Shuffle Play, some tracks may be played
back repeatedly.
You can play back all the tracks or a single track
on a disc repeatedly.
Press REPEAT on the remote repeatedly
during playback until “REPEAT” or
“REPEAT1” lights up in the display.
REPEAT: All the tracks on the disc(s), or all the
tracks in the album* are played back repeatedly
up to five times.
REPEAT1: A single track is played back
repeatedly until “REPEAT1” is cancelled.
* When “ALBM” or “ALBM SHUF” is selected for
MP3 audio tracks.
To cancel Repeat Play
Press REPEAT repeatedly until both
“REPEAT” and “REPEAT1” disappear from
the display.
Note
You cannot select “REPEAT” and “ALL DISCS
SHUF” at the same time.
Tip
You can change the Repeat Play setting when the
playback is stopped.
You can make a program of up to 25 steps from
all the discs in the order you want to play back.
You can synchro record the programmed tracks
onto a tape (page 17).
1
Press CD.
2
When playback is stopped, press PLAY
MODE on the remote repeatedly until
“PROGRAM” lights up in the display.
Playing repeatedly
— Repeat Play
Creating your own
program
— Program Play
continued