Sharp AQUOS LC-37DW99U - Manual (Page 8)

Supplied accessories
QUICK REFERENCE
2
1 3
6
2
3
1
Hex key
Screw
1 Insert the stand into the openings on the
bottom of the TV.
2 Insert and tighten the 4 screws into the 4
holes on the rear of the TV.
NOTE
• To detach the stand, perform the steps in reverse order.
1 Set the post for the stand unit onto the
box.
2 Attach the base to the post.
3 Insert and tighten the 5 screws into the 5
holes on the bottom of the base.
Confi rm that there are 9 screws (all the same
size) supplied with the TV.
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
NOTE
• Always use the AC cord supplied with the TV.
Make sure the following accessories are provided with the product.
Remote control unit
( g1)
Page 8
“AAA” size battery
( g2)
Page 8
AC cord
( g1)
Page 7
Stand unit
( g1)
Page 6
Cable Clamp ( g1)
Cable tie ( g1)
Page 7
Operation manual
( g1)
2
1
Hex key
Screw
Soft cushion