Siemens Industrial Ethernet Switches SCALANCE X-200 - Manual (Page 266)

Approvals and markings
SCALANCE X-200
266
Operating Instructions, 12/2011, A5E00349864-19
● SCALANCE X202-2IRT
● SCALANCE X212-2
● SCALANCE X206-1
● SCALANCE XF204-2
● SCALANCE XF206-1
have the approval:
II 3(2)G Ex nA [op is] IIC T4 DEKRA 11 ATEX 0060 X
These products meet the requirements of the standards
● EN 60079-15 : 2005
● EN 60079-0:2006
● EN 60079-28 : 2007
FM approval
The product meets the requirements of the standards
● Factory Mutual Approval Standard Class Number 3611
● FM Hazardous (Classified) Location Electrical Equipment:
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and
Non Incendive / Class I / Zone 2 / Group IIC / T4
FDA and IEC approvals
The following products meet the FDA and IEC requirements listed below.
● SCALANCE X204-2LD
● SCALANCE X206-1LD
● SCALANCE X212-2LD
&RPSOLHVZLWK&)5
DQG
&/$66/$6(5352'8&7
)'$ ,(&
Figure 9-1 FDA and IEC approvals
Note for Australia
The product meets the requirements of the AS/NZS 2064 standard (Class A).
UL Approval for Information Technology Equipment
Underwriters Laboratories (UL) complying with Standard UL 60950-1