Sanyo DVC-2000 - Manual (Page 30)

30
Operation with DVD and Audio CD (Continued)
General Features (Continued)
Time Search
The Time Search function allows you to start playing at
any chosen time on the disc.
1 Press DISPLAY during playback. The on-screen dis-
play appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
2 Within 10 seconds, use v v/V V to select the Time
Search icon in the on-screen display.
The “-:--:--” appears in the Time Search box.
3 Within 10 seconds, use the numbered buttons to
enter the required start time. Enter hours, minutes
and seconds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
4 Within 10 seconds, press SELECT/ENTER.
Playback starts from the selected time on the disc. If you enter
an invalid time, playback will continue from the current point.
Zoom
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM during playback or still playback to acti-
vate the Zoom function.
The square frame will be displayed in the center of the pic-
ture. If no button is pressed for more than 10 seconds, the
square frame will disappear.
Each press of the ZOOM button changes the TV screen in
the sequence shown below.
(X4) (X16) (Normal)
2 Use b/B/v/V buttons to move the zoom point.
3 Press SELECT/ENTER.
The zoomed picture appears.
4 To resume normal playback, press ZOOM repeatedly
until the normal picture appears.
Notes
The zoom function may not work for some DVDs.
The zoom function may not work on multi-angle
scenes.
Marker Search
You can start playback from a memorized point. Up to
five points can be memorized.
To enter a mark, follow these steps.
1 During disc playback, press MARKER when playback
reaches the spot that you want to memorize.
The Marker icon will appear on the TV screen briefly.
2 Repeat step 1 to enter up to five Marker points on a
disc.
To Recall a Marked Scene
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2 Use b/B/v/V to select a Marker that you want to
recall.
3 Press SELECT/ENTER.
Playback will start from the Marked scene.
To clear a Marked Scene
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2 Use b/B/v/V to select the Marker that you want to
erase.
3 Press CLEAR.
The Marker will be erased from the Marker Search menu.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
5 To return to the present picture, use b/B/v/V to
select the present picture then press
SELECT/ENTER.
1/5 DVD
DVD
- : - - : - - 0:16:57 DVD
X4
X16
Maker
Picture 1 Maker
Picture 2 Maker
Picture 3
Maker
Picture 4 Maker
Picture 5 Present
Picture