Using the travel charger, Using the desktop charger – Samsung SCH-A212 User Manual

Page 10

Advertising
background image

17

G

Ge

et

tt

ti

in

ng

g

S

St

ta

ar

rt

te

ed

d

16

G

Ge

et

tt

ti

in

ng

g

S

St

ta

ar

rt

te

ed

d

Using the Travel Charger

1. With the battery in position on the phone, connect

the lead from the travel charger to the jack at the
bottom of the phone.

2. Plug the power cord of the charger into a standard

AC outlet.

3. When charging finished (the indicator on the

connector of the charger turns green), disconnect
the charger from the AC outlet and remove it from
the phone by squeezing the two tabs on the
lead(➀) and unplug the lead (➁).

Using the Desktop Charger

1. Plug the power cord of the desktop charger into a

standard AC outlet. When the power is connected
properly, the LEDs on the charger flicker briefly
and then turn off.

2. Place the battery into the compartment of the

charger. Select one of the following two options:

• Place the phone with the battery attached into

the front compartment. The left LED on the
charger turns on in red.

• Insert a single battery (alone, not attached to

the phone) into the rear compartment. The right
LED on the charger turns on in red.

Advertising