Sanyo VCC-5984 - Manual (Page 14)

SETTINGS
Backlight compensation setting 45
This camera has two different backlight
compensation functions: Normally backlight
compensation switch
6 (MULT) and 7 (CENT)
are set to the down ( OFF) position. Change
the backlight compensation switch settings
depending on the conditions.
• MULT mode: Use this position when applying backlight
compensation to the whole of the screen.
• CENT mode: Use this position when applying backlight
compensation to only the central portion of the
screen.
Note:
• When using the backlight compensation function, set the switch 6
or 7 to the up position. When not using the function, set the
switch 6 and 7 to the down (OFF) position.
• When MULTI mode is set, scenes with no backlighting may
appear extremely dark and the object may appear over-exposed. If
this happens, move the switch
7 to the up (CENT) position.
If using a VIDEO type auto-iris lens
• The ALC volume on the lens should be turned all the way to Av
(Average).
• If the backlight compensation function does not compensate
properly for the conditions, set using the
LEVEL volume on the
lens.
6 7
(MULTI mode: 48 sections)
(CENT mode)
L53H4/US2 (VCC-5984) GB 2003, 1, 7
English
13