Sony SLV-ED343SG - Manual (Page 29)

29
Using Playback Dial on the VCR
With Playback Dial, you can
operate the following playback
options.
Playback Dial
To Do this
Resume play after pause Press H PLAY.
Fast-forward the tape Quickly turn and release Playback Dial to the right
(M FF) during stop.
Rewind the tape Quickly turn and release Playback Dial to the left
(m REW) during stop.
View the picture during
fast-forward or rewind During fast-forward, turn and hold Playback Dial
to the right (M FF). During rewind, turn and
hold Playback Dial to the left (m REW).
Play at high speed • During playback, quickly turn and release
Playback Dial to the right (M FF) or left (m
REW). The tape continues to play at high speed.
• During playback, turn and hold Playback Dial to
the right (M FF) or left (m REW). When
you release Playback Dial, normal playback
resumes.
Tip
• Adjust the picture using the PROGRAM +/– buttons on the VCR if:
- Streaks appear while playing in slow motion.
- Bands appear at the top or bottom while pausing.
- The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/–) at the same time.
Notes
• The sound is muted during these operations.
• In the LP mode, noise may appear or there may be no colour.
• If the playback mode mark does not appear on the TV screen, press DISPLAY.
• The picture may show noise when playing at high speed in reverse.
• Do not turn Playback Dial forcibly. It may damage Playback Dial.