Canceling a timer transmission job – Sharp AL-1661CS User Manual
Page 83
Advertising
79
SPECIAL FUNCTIONS
5
6
Press the [
] key (
) or [
] key (
)
to select the day of the week and
press the [ENTER] key.
7
Press the [
] key (
) or [
] key (
)
to select the transmission mode and
press the [ENTER] key.
8
Enter the fax number of the other
machine using one of the following
methods:
• Press a Rapid key.
• Enter a Speed Dial number with the numeric
keys.
• Enter the fax number with the numeric keys.
9
Press the [ENTER] key.
CANCELING A TIMER TRANSMISSION JOB
After a timer transmission job is set up, the job goes on standby until the specified time of transmission. If necessary,
the MEMORY STATUS function can be used to cancel a timer transmission job that is on standby ("CANCELING
(DELETING) A STORED FAX JOB" on page 61).
Advertising