Ports configuration, Classes tab – Samsung CLP-320 User Manual
Page 71
Management tools_ 71
The printer control buttons are, as follows:
•
Refresh:
Renews the available machines list.
•
Add Printer:
Allows you to add a new machines.
•
Remove Printer:
Removes the selected machine.
•
Set as Default:
Sets the current selected machine as a default
machine.
•
Stop/Start:
Stops/starts the machine.
•
Test:
Allows you to print a test page to ensure the machine is working
properly.
•
Properties:
Allows you to view and change the printer properties.
Classes tab
The Classes tab shows a list of available machine classes.
1
Shows all of the machine classes.
2
Shows the status of the class and the number of machines in the
class.
•
Refresh:
Renews the classes list.
•
Add Class:
Allows you to add a new machine class.
•
Remove Class:
Removes the selected machine class.
Ports configuration
In this window, you can view the list of available ports, check the status of
each port, and release a port that is stalled in a busy state when its owner
has terminated the job for any reason.
1
Switches to Ports configuration.
2
Shows all of the available ports.
3
Shows the port type, device connected to the port, and status.
•
Refresh:
Renews the available ports list.
•
Release port:
Releases the selected port.