Servis-Rhino 1598 - Manual (Page 43)

ASSEMBLY
1598 01/11 Assembly Section 3-9
© 2011 Alamo Group Inc.
ASSEMBL
Y
Plumbing Loader
1. Replace male couplers supplied with the tractor to the new ones with the loader keeping the colors
consistent.
2. Place sleeve over four hoses.
3. Connect hoses (4) to the adapter fittings, starting from the bottom tube (5).
4. Install dust caps onto the free end of the hoses, making sure that the color codes shown in Chart 1 below.
5. Connect hoses to the valve, keeping the colors consistent.
Port Identification
Port #1 - Red, Tilt Cylinder Rod End
Port #2 - Blue, Tilt Cylinder Base End
Port #3 - Yellow, Lift Cylinder Base End
Port #4 - Black, Lift Cylinder Rod End
Chart 1