Scag Power Equipment V-RIDE SVR61V-29FX User Manual
Operator’s manual, V-ride
Advertising
OPERATOR’S
MANUAL
Part No. 03269 Rev. 1
Printed 12/10
Printed in USA
© 2010
Scag Power Equipment
Division of Metalcraft of Mayville, Inc.
Congratulations on owning a Scag mower! This manual contains the
operating instructions and safety information for your Scag mower. Reading
this manual can provide you with assistance in maintenance and adjustment
procedures to keep your mower performing to maximum efficiency. The
specific models that this book covers are listed on the inside cover. Before
operating your machine, please read all the information enclosed.
V-Ride
Model:
SVR61V-29FX
Advertising
Table of contents
Document Outline
- SVR-61V Operators Manual 03269 Rev 1
- GENERAL INFORMATION
- SAFETY INFORMATION
- SPECIFICATIONS
- OPERATING INSTRUCTIONS
- 4.1 CONTROLS AND INSTRUMENT IDENTIFICATION
- 4.2 SAFETY INTERLOCK SYSTEM
- 4.3 INITIAL RUN-IN PROCEDURES
- 4.4 STARTING THE ENGINE
- 4.5 GROUND TRAVEL AND STEERING
- 4.6 ENGAGING THE DECK DRIVE (CUTTER BLADES)
- 4.7 HILLSIDE OPERATION
- 4.8 PARKING THE MOWER
- 4.9 AFTER OPERATION
- 4.10 REMOVING CLOGGED MATERIAL
- 4.11 MOVING MOWER WITH ENGINE STOPPED
- 4.12 RECOMMENDATIONS FOR MOWING
- 4.13 ADJUSTING CUTTING HEIGHT
- 4.14 adjusting the steering control (IF APPLIES)
- TROUBLESHOOTING CUTTING CONDITIONS
- ADJUSTMENTS
- MAINTENANCE
- ILLUSTRATED PARTS LIST
- 8.1 SCAG APPROVED ATTACHMENTS AND ACCESSORIES.
- 61V CUTTER DECK
- SVR-61V CUTTER DECK CONTROLS
- SVR-61V SHEET METAL COMPONENTS
- SVR-61V STEERING CONTROLS
- SVR FUEL SYSTEM - EPA PHASE 2
- SVR FUEL SYSTEM - EPA PHASE 3
- SVR-61VHYDRAULICS AND ENGINE COMPONENTS
- ELECTRICAL SYSTEM
- REPLACEMENT DECALS AND INFORMATION PLATES
- REPLACEMENT DECALS AND INFORMATION PLATES
- SVR ELECTRICAL SCHEMATIC
- LIMITED WARRANTY - COMMERCIAL EQUIPMENT