Sun Microsystems FC Switch-8 and Switch-16 816-0830-12 User Manual
Page 124
94
Sun StorEdge Network FC Switch-8 and Switch-16 Installation and Configuration Guide • October 2001
▼
To Unconfigure a Fabric Device
This procedure describes how to unconfigure a Fabric device that is attached to the
Fabric-connected host port
c0
.
1. Become superuser.
2. Identify the device to be unconfigured.
Only the devices on a Fabric-connected host port can be unconfigured.
3. Unconfigure the Fabric device.
Note –
Before you unconfigure a Fabric device, stop all activity to the device and
unmount any filesystems on the Fabric device. If the device is under any volume
manager’s control, see the documentation for your volume manager for maintaining
the Fabric device.
# cfgadm -al
Ap_Id
Type
Receptacle
Occupant
Condition
c0
fc-fabric
connected
configured unknown
c0::50020f2300006077 disk
connected
configured
unknown
c0::50020f23000063a9 disk
connected
configured
unknown
c0::50020f2300005f24 disk
connected
configured
unknown
c0::50020f2300006107 disk
connected
configured
unknown
c1
fc-private
connected
configured
unknown
c1::220203708b69c32b disk
connected
configured
unknown
c1::220203708ba7d832 disk
connected
configured
unknown
c1::220203708b8d45f2 disk
connected
configured
unknown
c1::220203708b9b20b2 disk
connected
configured
unknown
# cfgadm -c unconfigure c0::50020f2300006077