Ipod listening to the ipod (continued) – Sharp XL DK227N User Manual
Page 18
03/12/17
XL-DK227N.fm
18
XL-DK227N
iPod
Listening to the iPod (continued)
To disconnect iPod
Simply remove the iPod from the iPod dock. It is safe to do so even
during playback.
Navigating the iPod menus with the remote con-
trol
Notes:
When navigating the iPod menus with remote control, do not
operate any of the buttons on the iPod unit.
The volume level is adjusted by pressing the VOL (+ or –) button
on the main unit or the remote control. Adjusting the volume on the
iPod unit gives no effect.
Watching videos on a TV connected to iPod
Notes:
If the TV Out setting is already turned on at video menu, the video
is automatically displayed on the TV screen when MEMORY key
is pressed.
To return to watching video on iPod screen, press the CLEAR
button to enter video menu. Then press the DISPLAY button for
more than 2 seconds until “iPod DISP” appears. Repeat steps 2
and 3.
During iPod video playback, pressing the DISPLAY button will not
toggle video out display between iPod and TV.
iPod operation
The operations described below depend on the generation iPod you
are using.
System on operation
When the main unit is powered on, the iPod unit will automatically
power on when docked in the unit (including TIMER function).
System off (stand-by operation)
When the main unit is turned to stand-by mode, the docked iPod unit
will automatically turn to stand-by mode.
iPod playback detection function
Once the play button on the iPod unit is pressed, the main unit will
automatically change to iPod function overriding the previous
function selected.
Caution:
Unplug all accessories for the iPod before inserting it into the iPod
dock.
Stop button ( ) at main unit is invalid during iPod function.
1
Press the CLEAR/DIMMER button to view the menu on
iPod unit. Press it again to go back to previous menu.
2
Use the TUNING ( or
) button to select an item on the
menu and then press MEMORY button.
1
Press the DISPLAY button for more than 2 seconds. “TV
DISP” will appear on display.
2
Select the desired video from iPod unit to be played.
3
Press the MEMORY button to start playback.