Senco FramePro 750XL - Manual (Page 2)

ThinkTrac knows which type of nailing you want to do by your first action.
If a fastener isn’t driven within the allotted time, ThinkTrac’s electronic
ignition temporarily “times-out”. Before a fastener can be driven,
the trigger must be released and the safety element lifted off the
work surface—a habit that promotes safety.
®
ThinkTrac – A Revolutionary new
technology improves productivity
without sacrificing safety –
New
INTRODUCING
Think Productivity. Think Safety. ThinkTrac!
www.thinktrac.com
PRECISE NAILING
1. Depress
Safety Element
2. Pull Trigger
within 2 seconds
to drive fastener
or electronic
ignition temporarily
times-out.
PRODUCTION NAILING
1. Pull
Trigger
2. Depress
Safety Element
within 1 second
to drive fastener
or electronic
ignition temporarily
times-out.
Safety Element Safety Element
Shown: Senco’s FramePro ®
with ThinkTrac™ Technology
1. Pull the
Trigger First
ThinkTrac knows that
rapid nailing is required—
allowing one second
to drive a fastener,
virtually eliminating
unintentional nail drives.
2. Depress the
Safety Element First
ThinkTrac knows that
precise nailing is required—
allowing two seconds
to drive a fastener. Double
fires are virtually eliminated
in the trigger fire mode.
Now you can work
productively and safely…
ThinkTrac offers –
FLEXIBILITY…
You can operate in
bottom or trigger fire mode without
changing triggers or flipping a switch!
SPEED…
You can drive at the rate
of 8 nails per second.
SAFETY…
ThinkTrac offers advanced
safety; it’s unique microprocessor virtually
eliminates unintentional nail drives
and in trigger fire mode – double fires.
THINK
PRODUCTIVITY
You Choose…It knows
OR