Sennheiser HSP 2 - Manual (Page 4)

3
Delivery includes
y Boom microphone
y Neckband
y Neckband connecting cable
y Plastic transport case, foam-lined with cut-outs
y Instructions for use
y Warranty Certificate
Attaching the microphone boom
The neckband has two holders which are designed so that the
microphone booms can be worn on either side of the mouth.
To change the microphone
boom, carefully lever it out of
the holder. To reattach the
microphone boom, press it into
the holder until it snaps in. The
upper round recess is for the
HSP 2 (∅ 1.1 mm). The lower square recess at the front keeps
the HSP 4 in a fixed, non-rotating position, thus ensuring that
the sound inlet is reliably directed towards the mouth.
To benefit for a long time from the reliable and firm guidance
through the holder you should not turn the microphone boom
in the recess. Always carefully lever it out of the holder and
then let it snap in again.
Note:
In order to ensure the adjustability of the angle of the
microphone boom, maintain a minimum distance of 1 – 2
cm between the holder and the cable connection.