Sony HVL-F32X - Manual (Page 14)

14-GB
Mounting the flash (continued)
3
When using the digital still camera without the accessory
shoe
* Use the supplied connection cord.
* Use the supplied shoe adaptor.
• To use the supplied shoe adaptor, attach the shoe adaptor to the tripod
screw hole of the digital still camera.
1
Turn in the direction of the arrow to tighten lightly.
• Attach this unit to the shoe adaptor.
2 Insert the connection cord into the ACC terminal and the terminal
of the digital still camera.
3 With the flashing section facing forward, securely attach it to the shoe
adaptor.
The accessory shoe can rotate.
4 Turn the rotating knob in the direction of the arrow to tighten.
5 Attach the connection cord to the connection cord terminal of this
unit.
6 Fit the shoe adaptor onto the digital still camera and securely tighten
1
in the direction of the arrow.
P Note
Removing or attaching this unit to a digital still camera while the power is ON,
or disconnecting the connection cord while the power is ON can cause the flash
to fire erroneously.
1
3
2
4
5
6