Sega LTM170E6-L04 - Manual (Page 27)

19 www.seuservice.com
SECURING THE STATIONS
Be sure that all adjusters are placed against the floor. Failure to place the adjusters
against the floor could lead to accidents caused by cabinet movement.
WARNING!
2
Connect the fiber optic and power harness from the Montior Base
to the Station Pedestal. Each side of the Harness is secured with 4
screws.
Bracket Holes
Connections
For each Station Set: Connect the power cable for the 2 stations
and the 1 fiber optic connector. Then slide the station set into
the pedestal having a care the cables are not pinched between the
pedestal and the station set.
Station Bolts
Opening the right Station Hood on the right station set, and the
left Station Hood on the left station set, reaching through the
back , Place the 4 bolts through the pedestal holes into the station
brackets which will secure the stations to the station pedestal.